Submissions

Online Submissions

Already have a Username/Password for International Journal of Intelligent Systems and Applications in Engineering?
Go to Login

Need a Username/Password?
Go to Registration

Registration and login are required to submit items online and to check the status of current submissions.

 

Author Guidelines

Please use the attached template at the end of this instruction to prepare your paper, but the use of the template is not a requirement for submission. You may refer to a current issue of this journal for general style.

 

1. Aims and Scope

International Journal of Intelligent Systems and Applications in Engineering (IJISAE) publishes original articles, reviews and short communications on all aspects of intelligent systems and applications in engineering. Fields includes but not limited to Robotics and mechatronics Technologies, Artificial intelligence and knowledge based systems Technologies, Real-time computing and its algorithms, Embedded systems Technologies, Actuators and sensors, Micro/nano Technologies, Sensing and multiple sensor fusion.

 

2. Submission of Manuscripts

Manuscript prepared in MS Word 2007 must be converted into a single file before submission. Paper can be submitted online at http://ijisae.atscience.org by registering and logging in to this website. Once you are registered, navigate to submit manuscript page to submit paper online.

 

3. Manuscript Preparation

Formatting/Style

A4 paper format, the printing area is 17.5 cm x 25.8 cm. The margins should be  (top 18.1 mm , bottom 20 mm, left 19 mm, and right 16 m). The paper style of IJISAE should be followed.

Authors List and Affiliation Format

Authors' full first and last names must be given. A corresponding author must be marked as *. The complete address information including city, zip code, state/province, country, and email address should be added at the first page author information box.

Abstract  

The abstract should be prepared as one paragraph (150 to 250 words). .Avoid writing long formulas with subscripts in the title; short formulas that identify the elements are fine (e.g., "Nd–Fe–B"). Do not write “(Invited)” in the title. Full names of authors are preferred in the author field, but are not required. Put a space between authors’ initials. The abstract must be a concise yet comprehensive reflection of what is in your article. In particular, the abstract must be self-contained, without abbreviations, footnotes, or references. It should be a microcosm of the full article. 

Keywords

A list of four to six keywords must be given, and placed after the Abstract. Enter key words or phrases in alphabetical order, separated by commas.

Figures, Schemes and Tables

Authors are encouraged to prepare figures, schemes and tables in color. Figure and tables must be numbered (Fig 1,  Table 1, etc.) and an explanatory title must be added. All table columns should have an explanatory heading. Please supply legends for all figures, schemes and tables. The legends should be prepared as a separate paragraph of the main text and placed in the main text before a table, or after a figure or a scheme.

Requirements for submitting Electronic Image Files

Graphic files can be in bitmaps or vectors. When you send the bitmaps please ensure high resolution. The preferred bitmap formats are TIFF (.TIF), PCX, JPEG (.JPG), (.PCD), Scitex (.CT) and GIF files. They should be at least 300 dpi.

Reference Preparation

Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Organization and citation of the bibliography are made in IEEE style in sign [1], [2] and so on.

The heading of the References section must not be numbered.  All reference items must be in 12 pt font.  Please use Regular and Italic styles to distinguish different fields as shown in the References section.Number the reference items consecutively in square brackets (e.g. [1]).

When referring to a reference item, please simply use the reference number, as in [2].  Do not use “Ref. [3]” or “Reference [3]” except at the beginning of a sentence, e.g.  “Reference [3] shows …”.  Multiple references are each numbered with separate brackets (e.g. [2], [3], [4]–[6]).

 

Basic format for books:

[1]  G. O. Young, “Synthetic structure of industrial plastics,” in Plastics,  2nd  ed.,  vol.  3, J.  Peters, Ed.  New York, NY, USA: McGraw-Hill, 1964, pp. 15–64.

[2]  W.-K. Chen, Linear Networks and Systems. Belmont, CA, USA: Wadsworth, 1993, pp. 123–135.

 

Basic format for periodicals:

[3]  J. U. Duncombe, “Infrared navigation—Part I: An assessment of feasibility,” IEEE Trans. Electron Devices, vol. ED-11, no. 1, pp. 34–39, Jan. 1959, 10.1109/TED.2016.2628402.

[4]  E. P. Wigner, “Theory of traveling-wave optical laser,” Phys. Rev., vol. 134, pp. A635–A646, Dec. 1965.

[5]  E. H. Miller, “A note on reflector arrays,” IEEE Trans. Antennas Propagat., to be published.

 

Basic format for reports:

[6]  E. E. Reber, R. L. Michell, and C. J. Carter, “Oxygen absorption in the earth’s atmosphere,” Aerospace Corp., Los Angeles, CA, USA, Tech. Rep. TR-0200 (4230-46)-3, Nov. 1988.

[7]  J. H. Davis and J. R. Cogdell, “Calibration program for the 16-foot antenna,” Elect. Eng. Res. Lab., Univ. Texas, Austin, TX, USA, Tech. Memo. NGL-006-69-3, Nov. 15, 1987.

 

Basic format for handbooks:

[8]  Transmission Systems for Communications, 3rd ed., Western Electric Co., Winston-Salem, NC, USA, 1985, pp. 44–60.

[9]  Motorola Semiconductor Data Manual, Motorola Semiconductor Products Inc., Phoenix, AZ, USA, 1989.

 

Basic format for books (when available online):

[10] G. O. Young, “Synthetic structure of industrial plastics,” in Plastics, vol. 3, Polymers of Hexadromicon, J. Peters, Ed., 2nd ed. New York, NY, USA: McGraw-Hill, 1964, pp. 15-64. [Online]. Available: http://www.bookref.com.

[11] The Founders’ Constitution, Philip B. Kurland and Ralph Lerner, eds., Chicago, IL, USA: Univ. Chicago Press, 1987. [Online]. Available: http://press-pubs.uchicago.edu/founders/

[12] The Terahertz Wave eBook. ZOmega Terahertz Corp., 2014. [Online]. Available: http://dl.z-thz.com/eBook/zomega_ebook_pdf_1206_sr.pdf. Accessed on: May 19, 2014.

[13] Philip B. Kurland and Ralph Lerner, eds., The Founders’ Constitution. Chicago, IL, USA: Univ. of Chicago Press, 1987, Accessed on: Feb. 28, 2010, [Online] Available: http://press-pubs.uchicago.edu/founders/

 

Basic format for journals (when available online):

[14] J. S. Turner, “New directions in communications,” IEEE J. Sel. Areas Commun., vol. 13, no. 1, pp. 11-23, Jan. 1995.

[15] W. P. Risk, G. S. Kino, and H. J. Shaw, “Fiber-optic frequency shifter using a surface acoustic wave incident at an oblique angle,” Opt. Lett., vol. 11, no. 2, pp. 115–117, Feb. 1986.

[16] P. Kopyt et al., “Electric properties of graphene-based conductive layers from DC up to terahertz range,” IEEE THz Sci. Technol., to be published. DOI: 10.1109/TTHZ.2016.2544142.

 

Basic format for papers presented at conferences (when available online):

[17] PROCESS Corporation, Boston, MA, USA. Intranets:  Internet technologies deployed behind the firewall for corporate productivity. Presented at INET96 Annual Meeting. [Online]. Available:  http://home.process.com/Intranets/wp2.htp

 

Basic format for reports   and   handbooks (when available online):   

[18] R. J. Hijmans and J. van Etten, “Raster: Geographic analysis and modeling with raster data,” R Package Version 2.0-12, Jan. 12, 2012. [Online]. Available: http://CRAN.R-project.org/package=raster

[19] Teralyzer. Lytera UG, Kirchhain, Germany [Online]. Available: http://www.lytera.de/Terahertz_THz_Spectroscopy.php?id=home, Accessed on: Jun. 5, 2014

 

Basic format for computer programs and electronic documents (when available online):

[20] U.S. House. 102nd Congress, 1st Session. (1991, Jan. 11). H. Con. Res. 1, Sense of the Congress on Approval of Military Action. [Online]. Available: LEXIS Library: GENFED File: BILLS

 

Basic format for patents (when available online):

[21] Musical toothbrush with mirror, by L.M.R. Brooks. (1992, May 19). Patent D 326 189 [Online]. Available: NEXIS Library: LEXPAT File:   DES

 

Basic format for conference proceedings (published):

[22] D. B. Payne and J. R. Stern, “Wavelength-switched pas- sively coupled single-mode optical network,” in Proc. IOOC-ECOC, Boston, MA, USA, 1985, pp. 585–590.

 

Example for papers presented at conferences (unpublished):

[23] D. Ebehard and E. Voges, “Digital single sideband detection for interferometric sensors,” presented at the 2nd Int. Conf. Optical Fiber Sensors, Stuttgart, Germany, Jan. 2-5, 1984.

 

Basic format for patents:

[24] G. Brandli and M. Dick, “Alternating current fed power supply,”  U.S. Patent 4 084 217, Nov. 4, 1978.

 

Basic format for theses (M.S.) and dissertations (Ph.D.):

[25] J. O. Williams, “Narrow-band analyzer,” Ph.D. dissertation, Dept. Elect. Eng., Harvard Univ., Cambridge, MA, USA, 1993.

[26] N. Kawasaki, “Parametric study of thermal and chemical nonequilibrium nozzle flow,” M.S. thesis, Dept. Electron. Eng., Osaka Univ., Osaka, Japan, 1993.

 

Basic format for the most common types of unpublished references:

[27] A. Harrison, private communication, May 1995.

[28] B. Smith, “An approach to graphs of linear forms,” unpublished.

[29] A. Brahms, “Representation error for real numbers in binary computer arithmetic,” IEEE Computer Group Repository, Paper R-67-85.

 

Basic formats for standards:

[30] IEEE Criteria for Class IE Electric Systems, IEEE Standard 308, 1969.

[31] Letter Symbols for Quantities, ANSI Standard Y10.5-1968.

 

Article number in reference examples:

[32]  R. Fardel, M. Nagel, F. Nuesch, T. Lippert, and A. Wokaun, “Fabrication of organic light emitting diode pixels by laser-assisted forward transfer,” Appl. Phys. Lett., vol. 91, no. 6, Aug. 2007, Art. no. 061103. 

[33]  J. Zhang and N. Tansu, “Optical gain and laser characteristics of InGaN quantum wells on ternary InGaN substrates,” IEEE Photon. J., vol. 5, no. 2, Apr. 2013, Art. no. 2600111

 

Example when using et al.:

 S. Azodolmolky et al., Experimental demonstration of an impairment aware network planning and operation tool for transparent/translucent optical networks,” J. Lightw. Technol., vol. 29, no. 4, pp. 439–448, Sep. 2011. 

 

4. Review/Referees

Scientific contributions will be double blind peer-reviewed on the criteria of originality and quality. To aid in the peer review, authors can provide the names, addresses and e-mail addresses of up to 5 potential referees, although the editor will not necessarily contact them.

 

5. Revised Manuscripts

In revised manuscripts, the areas containing the major required changes should be marked and the script color changed. Upon acceptance of the manuscript, the final uploaded version will be taken as the basis for subsequent production process, and papers may be subjected to editorial changes. Responsibility for the factual accuracy of a paper rests entirely with the author.

 

6. Proofs and Reprints

Before publication, the corresponding author will receive page proofs via website. The proofs should be corrected carefully. In particular, authors should answer any editing queries. Authors may freely download the PDF file from which they can print unlimited copies of their articles.

 

7. Copyright/Open Access

The authors vouch that the work has not been published elsewhere, and the manuscript has not been submitted to another journal. The publishing misconduct, such as plagiarism and data fabrication, will result in rejection/ retraction of the manuscript. Please note that if you are submitting material which has already been published elsewhere, you must also send the permission in writing that this material may be reprinted in IJISAE to the Editorial Office, and the authors are expected to carry any costs arising from the permission. When the manuscript is accepted for publication, the authors agree to automatic transfer of the copyright to the publisher Advanced Technology and Science, Konya, TURKEY. However, the authors retain the right of the paper for own use. The Articles published in IJISAE will be open-access articles.

 

Submit your manuscripts
Please download the template in DOC , DOCX.

 

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

  1. The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  2. The submission file i.e. paper is in Microsoft Word file format (*.doc, *.docx). The submitted paper in any other format will be rejected without further notice.
  3. The paper is formatted according to the paper requirements (see IJISAE template).
  4. Author name and affiliation will be placed through submission process under Step 3. (Entering the Submission's Metadata). In case of multiple authorship of the submitted paper, the author name and affiliation of each author will be specified under the same Step 3. by clicking 'Add Author'.
  5. Please suggest three reviewers(name, organization, e-mail) who you would recommend to review your manuscript.The suggested REVIEWERSmust be added as 'Comments to the Editor' at the bottom of Step 1 of the manuscirpt submission (below).

    The referee must have at least a Ph.D. Note that the editor retains the sole right to decide whether or not the suggested reviewers are used.

 

Copyright Notice

All papers should be submitted electronically. All submitted manuscripts must be original work that is not under submission at another journal or under consideration for publication in another form, such as a monograph or chapter of a book. Authors of submitted papers are obligated not to submit their paper for publication elsewhere until an editorial decision is rendered on their submission. Further, authors of accepted papers are prohibited from publishing the results in other publications that appear before the paper is published in the Journal unless they receive approval for doing so from the Editor-In-Chief.

IJISAE open access articles are licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. This license lets the audience to give appropriate credit, provide a link to the license, and indicate if changes were made and if they remix, transform, or build upon the material, they must distribute contributions under the same license as the original.

 

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

 
 
© AtScience 2013-2017     -     AtScience is a registered trademark property of AtScience.